|11-27-2010 10:31 AM|
When QuotesChimp com
acyclovir 400mg, ampicillin 500mg capsules, phenergan 25 mg,
|05-28-2010 01:50 PM|
Hello, I have a question about the grout on the avaire snap tile flooring: my floor got installed professionaly 12 days ago and the grout in still is not dry? how long does it take? thanks for you help
|05-13-2010 10:35 PM|
|srobbins||Thanks I will try it. Your right sulfamic acid didn't work. I think what did come off was from all the scrubbing I did, not the acid.|
|05-10-2010 09:09 AM|
I was tried a few different things trying to remove the acrylic grout residue, sulfamic acid didn't work, but Soft Scrub with bleach worked really well!
Just apply it to the tile and scrub with a white scrub pad or stiff bristle brush then wipe with clean water. It takes a little effort,but it removes the residue and really brightens the grout joints. Give it a try and let me know what you think. Thanks.
|05-07-2010 08:28 PM|
This is mentioned as a cleaner on the acrylic grout. Has anyone had success with this material? If so where do you find it?
|02-04-2010 11:35 AM|
Not sure how well sulfamic acid will work on a urethane grout. It's typically used for portland cement based grouts.It's worth a try.
|02-04-2010 10:12 AM|
I have tried krud kutter and grout haze remover using a scotch brite pad and the tile remains chaulky/cloudy compared to a tile out of the box. Has anyone tried the sulfamic acid mentioned in the instructions?