 |
|
|||||||
Topic Review (Newest First)
|
| 06-15-2009 11:29 AM | |
| Avaire Archive |
Author: thomas owens Date: 12/13/2007 12:21 am EDT Fred Kralowetz wrote: ------------------------------- What is the best method for making non-linear cuts of Avaire tile so that the plastic base does not present a problem when using the multiple cut method with a wet saw. I am trying to make a circular cut around a toilet drain. |
| 06-15-2009 11:29 AM | |
| Avaire Archive |
Author: Fred Date: 8/9/2007 10:47 am EDT I received a very timely phone response to my inquiry from Mr. Fuller in which he recommended the 4" right-angle grinder with a diamond tip blade. This worked great for making the circular cut. Additionally, since I had a only a small number of straight cuts, I was able to use the grinder for all the straight cuts as well, thus saving the need to obtain a wet saw. Thanks for your great advice. |
| 06-15-2009 11:28 AM | |
| Avaire Archive |
Author: Krista Ebertowski Date: 8/8/2007 11:05 am EDT Dear Fred, What a GREAT question! Our technical advisor suggests using a 4" angle grinder with a dry cut diamond tipped blade. Please let us know if you need additional assistance. Krista |
| 06-15-2009 11:28 AM | |
| Avaire Archive |
Non-linear cuts Author: Fred Kralowetz Date: 8/6/2007 6:56 pm EDT What is the best method for making non-linear cuts of Avaire tile so that the plastic base does not present a problem when using the multiple cut method with a wet saw. I am trying to make a circular cut around a toilet drain. |
