Avaire Forum  

Go Back   Avaire Forum > Public Information > Floor Preparation > Subfloor?

Thread: Subfloor? Reply to Thread
Your Username: Click here to log in
Image Verification
Post Icons
You may choose an icon for your message from the following list:

Additional Options
Miscellaneous Options

Topic Review (Newest First)
10-04-2010 01:53 PM

Not your typical subfloor! I dont know of any hardsurface floors that would approve an installation over joists 48" on center. You will have better luck installing a floor thats floating rather than one thats fastened to the floor. When you walk on the floor can you tell if there's movement? If there isn't any movement, and it's a small space, you might not have any problems. Make sure the floor is flat, and you maintain your perimeter gaps I don't know why it wouldn't work. Jump up and down on the floor and see how much the floor moves. If it doesn't move then you'll be fine.
10-02-2010 08:40 PM

Ok, I have a bit of a subfloor issue and I'm hoping that Avaire is the solution to my problem. I have a bathroom (80" x 58" less a vanity that is 48" x 21") that I need to find a floor for (would like to avoid vinyl or laminates). The joists are sistered 2"x12" that are spaced at 48" on center. Subfloor is a pier and beam system with piers spaced at 8'. The actual subfloor is tongue and groove 2"x4" with 5/8" partial board over that. I know that the construction does not meet the requirements for your floor , but I'm hoping that in such a small space I might be able to use the Avaire and get away with it.

Any thoughts or suggestions? Thanks in advance.

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 08:30 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

(888) 528-2473 Copyright © 2009 : CoMc, LLC All Rights Reserved. ~ Design by Chip Thompson