Avaire Forum

Avaire Forum (http://www.avairefloors.com/forum/index.php)
-   Floor Preparation (http://www.avairefloors.com/forum/forumdisplay.php?f=24)
-   -   Subfloor? (http://www.avairefloors.com/forum/showthread.php?t=522)

Shoeless 10-02-2010 08:40 PM

Ok, I have a bit of a subfloor issue and I'm hoping that Avaire is the solution to my problem. I have a bathroom (80" x 58" less a vanity that is 48" x 21") that I need to find a floor for (would like to avoid vinyl or laminates). The joists are sistered 2"x12" that are spaced at 48" on center. Subfloor is a pier and beam system with piers spaced at 8'. The actual subfloor is tongue and groove 2"x4" with 5/8" partial board over that. I know that the construction does not meet the requirements for your floor :(, but I'm hoping that in such a small space I might be able to use the Avaire and get away with it.

Any thoughts or suggestions? Thanks in advance.

Chris 10-04-2010 01:53 PM

Not your typical subfloor! I dont know of any hardsurface floors that would approve an installation over joists 48" on center. You will have better luck installing a floor thats floating rather than one thats fastened to the floor. When you walk on the floor can you tell if there's movement? If there isn't any movement, and it's a small space, you might not have any problems. Make sure the floor is flat, and you maintain your perimeter gaps I don't know why it wouldn't work. Jump up and down on the floor and see how much the floor moves. If it doesn't move then you'll be fine.

All times are GMT -5. The time now is 08:34 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.