Avaire Forum

Avaire Forum (http://www.avairefloors.com/forum/index.php)
-   Trims and Transitions (http://www.avairefloors.com/forum/forumdisplay.php?f=30)
-   -   finishing edges (http://www.avairefloors.com/forum/showthread.php?t=20)

Avaire Archive 06-15-2009 11:17 AM

finishing edges
 
Author: Lorraine
Date: 7/7/2007 10:30 pm EDT
I am seriously contemplating using avaire when I refinish my bathroom over a vinyl floor. I am how I am going to finish the edges i.e. the baseboard. I am not a fan of vinyl baseboard. I prefer the look frequently used in traditional porcelain tile where they use half a tile and create a baseboard or they use bull-nose shaped tile to finish it off. It is a nice clean crisp look.. Is there any contra-indication to attaching the product to the wall after cutting it down to size and the obviously grouting it? You would be seeing a cross-section of the tile. What would that look like??

Avaire Archive 06-15-2009 11:18 AM

RE: finishing edges
 
Author: Jonathan
Date: 7/9/2007 3:30 pm EDT
Avaire could be cut in half and then adhered to the wall with a strong construction adhesive. However, you would see the cross-section of the tray unless you ran a bead of grout and/or caulk across the top edge.

The other option would be to color-match a traditional tile and use that for the baseboard.

Good Luck! Let us know how the floor turns out - perhaps post a picture.

Jonathan


All times are GMT -5. The time now is 08:08 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.