Thread: Grouting edge
View Single Post
  #1  
Old 06-24-2009, 10:06 AM
Avaire Archive Avaire Archive is offline
Archive
 
Join Date: Jun 2009
Posts: 943
Default Grouting edge

Author: James Ruddock
Date: 1/1/2009 2:42 am EDT
John said "Two walls are brick and the tiles were cut to fit as closely as possible to the walls and colored mortar was used to fill the gaps between the tiles and brick. I found that using a 1 gallon zip lock type bag with one of the bottom corners snipped off worked really well to accurately place the mortar where needed. It worked almost like a toothpaste tube and really eliminated a lot of clean up." Is this an acceptable practice to fill the 1/4 edge void with mortar? Thanks Jim
Reply With Quote