![]() |
#1
|
|||
|
|||
![]()
Author: Glen
Date: 4/15/2009 10:26 pm EDT Is it recomended to put silicone between the tiles next to a shower before grout is put in the joints |
#2
|
|||
|
|||
![]()
Author: chris
Date: 4/16/2009 2:16 pm EDT Yes. The silicone sealant will provide a water tight seal between the tile and the showerbase and will allow the floor to float properly. You should never grout any tile, including Avaire,next to a wall or any obstruction. |
#3
|
|||
|
|||
![]()
Author: Glen
Date: 4/16/2009 8:44 pm EDT How about the joints away from the shower stall,can you put silicone at the bottom of the joint and then grout over the top of that |
#4
|
|||
|
|||
![]()
Author: chris
Date: 4/17/2009 8:23 am EDT There wouldn't be any need to do that.Are you thinking about making the grout more waterproof? Because the urethane grout provides a water resistant joint except at perimeter areas that are subject to movement.Hope this helps. If it's something else.Let me know.Thanks |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|